None return valve to be used where a water pump or injector is fitted.
The inlets and outlets are tapped 1/4" x 40tpi and the inlet is fitted with a nut and nipple for 1/8" pipe. A nipple for 5/32" pipe can be fitted if required.

£8.50 each

5/16" x 32tpi threads. Suitable for all Maccsteam Boilers. When supplied fitted to a boiler the valve will be set to 60psi for the 2 1/2" and 3 1/2" boilers and to 70psi for the 4" boilers. If you wish to operate these boilers at different pressures please ask - up to 60psi for the 2 1/2" and 3 1/2" boilers and 100psi for the 4". Safety valves supplied without boilers will need to be set by the customer.

£13.50 each

1/4" x 40tpi threads fitted with a nipple for 5/32" pipe.

Requires a 3/8" x32 to 1/4" x 40 adaptor for the 3 1/2 and 4" boilers, free when supplied with a boiler. Can also be fitted with nipple for 1/8" pipe

Steam Valve £16.25 each
Adaptor £3.00 each

3/4" diam. 0 – 80 lb £30.63

Larger sizes also available.

For mounting pressure gauges to boilers. 3/32" pipe fitted with a 3/16 x 40tpi nut and nipple on one end for attaching to the gauge, and a banjo fitting with a 1/4" x 40tpi bolt at the other.

£6.50 each

Blowdown type with 1/4" x 40tpi threads and 5mm gauge glass, fitted with blowdown valve.

£19.91 each

Spare gauge glass £0.70 each

Consists of jet, jet holder, pipe nut and nipple for 1/8" pipe.

£6.75 each

Gas Jet

Gas jet as fitted to my burners. 2 sizes are available, one for burners up to 1 1/2" diameter and one for larger burners.

£2.60 each

Standard type as fitted to all Maccsteam gas tanks. Fits a 1/4"x40tpi bush. Outlet is tapped 1/4"x40tpi and fitted with a nut and nipple for 1/8" pipe. Can also be supplied with 5/32" nipple if required.

Please Note: Some older Maccsteam tanks were fitted with 3/16"" x 40 bushes. If you require a replacement valve please tell me when you order. I still keep a stock of the older valves.

£16.00 each

"Ronson" type filler valve, as fitted to all Maccsteam gas tanks and many other makes as well

£4.75 each